Skip to the record

CarsMultiverse/UK recalls

A recall published by DVSA, the British vehicle safety authority, with every version of its wording that this site has read. Unchanged since first read.

DVSA referenceR/2023/084
Launched12 April 2023
MakeNissan (Gb) (listed as Nissan Motor (GB) Limited)
Manufacturer referencePN2C7
Vehicles listed78

Models

ModelVehiclesBuilt fromBuilt to
NV400 (X62)788 December 200116 February 2022

Concern

The torque value given in the Repair bulletin for R/2022/254 for the injector clamp bolts was insufficient. Under specific driving conditions this can cause the leakage of exhaust gasses past the injector sealing washer.

Defect, as DVSA words it

The torque value given in the Repair bulletin for R/2022/254 for the injector clamp bolts was insufficient. Under specific driving conditions this can cause the leakage of exhaust gasses past the injector sealing washer.

Remedy, as DVSA words it

Replace all injector sealing washers retaining plates bolts and pipes as necessary and tighten with the correct torque.

What changed since we first read it

Nothing yet. The wording has been the same on every read since 4 September 2026. The file is read again every day; if DVSA rewrites the defect, remedy or concern, the old and new text will appear here with both dates.

The same recall in other registers

European UnionSafety Gate alert A12/01595/23 from France, 14/07/2023

Matched through the manufacturer's own reference (PN2C7), which the registers share. See the same recall, Britain and America.

Check this recall on the DVSA service

Read from DVSA's bulk recalls file (RecallsFile.csv, 7 MB) on 4 September 2026; this recall first read on 4 September 2026, read once. Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA, Check vehicle recalls. CarsMultiverse is an independent site, not an authority: the official notice is the one on the DVSA service.

A project by A.I.T. Multiverse Consulting Ltd · cars@aitmultiverse.com