Hale Quenching Agent Sensor, model year 9999. Filed by Hale Products Inc and reported to NHTSA on 9 October 2015. 1,289 vehicles potentially affected.
What the notice says Hale Products Inc. (Hale) is recalling certain Quenching Agent Level Pressure Sensors, Class 1 ITL Level Displays, manufactured May 1, 2015, to July 31, 2015. When the vehicle is stationary, the affected sensors may give an incorrect reading of the remaining fire fighting agent (typically water or firefighting foam) …
Is your vehicle included? Check with your VIN at NHTSA, or ask a dealer. This page is an independent copy of the notice, kept so you can see what changed after it was published. It is not the authority, and the authority’s own text is the one to act on.
What owners ask about this recall
- Which vehicles does recall 15E084 cover?
- Hale Quenching Agent Sensor.
- What is wrong with them?
- Hale Products Inc. (Hale) is recalling certain Quenching Agent Level Pressure Sensors, Class 1 ITL Level Displays, manufactured May 1, 2015, to July 31, 2015.
- What can happen if it is not put right?
- If there is an incorrect reading of agent in the tank, it can increase the risk of injury to the fire fighter if the tank unexpectedly runs out of agent.
- Is there a fix yet?
- Yes, and it is free. Hale will notify owners, and dealers will either recalibrate the system or replace the pressure sensor, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Hale customer service at 1-800-533-3569.
- What should I do now?
- Check your own vehicle by its VIN with NHTSA, which is the record to act on.
Answered from the register this site holds. NHTSA is the record to act on.
What the authority says can happen if this is not fixed: “If there is an incorrect reading of agent in the tank, it can increase the risk of injury to the fire fighter if the tank unexpectedly runs out of agent.”
affected
in the notice
caught
| Campaign | 15E084 |
|---|---|
| Filed by | Hale Products Inc |
| System at fault | Equipment |
| Reported to NHTSA | 9 October 2015 |
| Model years | 9999-9999 |
| Vehicles named | HALE QUENCHING AGENT SENSOR |
What the notice says today
The consequence
If there is an incorrect reading of agent in the tank, it can increase the risk of injury to the fire fighter if the tank unexpectedly runs out of agent.
The remedy
Hale will notify owners, and dealers will either recalibrate the system or replace the pressure sensor, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Hale customer service at 1-800-533-3569.
What it said before
This campaign is in the register but not yet in the dated wording archive, so we cannot yet say whether its text has moved. It enters the archive on the next pass.
This is one of 2,632 notices in the record whose component field names equipment. Across that group the median wait before owners were written to was 29 days.
Last checked . No change has been recorded in the wording.
How to cite this record
Quoting the wording on this page means quoting a version, so the date belongs in the citation:
CarsMultiverse, recall 15E084, wording as read on 16 September 2026. https://carsmultiverse.com/recall/15e084/
The cross-border matches used on this site are deposited as a citable dataset: doi:10.5281/zenodo.22087136. The recall wording itself is published by the national authority named above and is theirs, not ours.
The recall record and its wording are published by the US National Highway Traffic Safety Administration and are US Government public domain. The dated archive, the comparison and any before-and-after above are CarsMultiverse. How fresh every engine behind this page is, is public on the status page. To check a specific vehicle, use NHTSA’s own VIN lookup.
Other Hale notices we hold
- 26E030: Weldon UV800 Display Unit user interfaces, with part numbers 610-00060-080-51, 610-00060-080-50, 610-00060-081, and 610-00091
- 19E055: SmartFoam 6
- 18E079: Kubota Diesel Powered Portable Pumps, part number 200779, revisions A through C
- 17E056: retaining rings, part number 077-0750-21-0, that secure the pressure relief valve in the water pumps used for fire fighting
- 17E009: Fire Pump Engagement Pressure Switches, part number 200-2560-00-0
- 16E038: Class 1 Es-Key power control modules, models PDM, HDPDM, SN, and SNII, manufactured February 28, 2006, to April 6, 2016
- 16E029: Portable Pumps powered with Yanmar 9 horsepower diesel engines, manufactured March 1, 2007, to December 11, 2015
- 16E027: 6 Inch Suction Strainers, part number 010-0030-00-0, manufactured July 15, 2015, to March 30, 2016
All 10 Hale campaigns we hold · Every manufacturer in the record
The fingerprint of this notice
We take a SHA-256 of each of the three blocks of text the authority publishes and keep the first eight characters. As we last read campaign 15E084 on 23 August 2026, they were:
- Defect summary
fbf9e099 - Consequence
5128b9a3 - Remedy
78560c74
We first read this notice on 21 August 2026. It has not moved since. If it ever does, these characters will not match, and the change will be dated here.
The wording we hold for 15E084 · how the whole register is watched
Put this notice on your site
A small badge that links here and names the register's reference. It costs one line of HTML and needs no key.
The badge is free to use. It links to this page and nowhere else, and it never shows advertising.
Owners of these cars
No register publishes what happens after the letter. Owners do: tell us, in two taps.
Anonymous: no account, no cookie, nothing you type is stored beyond these choices. Figures appear once 3 owners have answered, and are published with the record under CC BY 4.0.