G2 Axle & Gear Axle Housing, model year 9999. Filed by TAP Worldwide, LLC and reported to NHTSA on 30 July 2018. 230 vehicles potentially affected.
What the notice says TAP Worldwide, LLC (TAP) is recalling certain G2 Axle and Gear aftermarket Axle Housings, part number 67-2033TJR. The rosette welds in the center of the axle housings may have insufficient strength, allowing the axle tube to rotate unexpectedly.
Is your vehicle included? Check with your VIN at NHTSA, or ask a dealer. This page is an independent copy of the notice, kept so you can see what changed after it was published. It is not the authority, and the authority’s own text is the one to act on.
What owners ask about this recall
- Which vehicles does recall 18E070 cover?
- G2 Axle & Gear Axle Housing.
- What is wrong with them?
- TAP Worldwide, LLC (TAP) is recalling certain G2 Axle and Gear aftermarket Axle Housings, part number 67-2033TJR. The rosette welds in the center of the axle housings may have insufficient strength, allowing the axle tube to rotate unexpectedly.
- What can happen if it is not put right?
- If the axle tubes rotate, the vehicle's driveshaft may bind resulting in a loss of power and an increased risk of a crash.
- Is there a fix yet?
- Yes, and it is free. TAP will notify owners and will replace the axle housings with new housings, free of charge. The recall began October 1, 2018. Owners may contact TAP customer service at 1-888-376-1417.
- What should I do now?
- Check your own vehicle by its VIN with NHTSA, which is the record to act on.
Answered from the register this site holds. NHTSA is the record to act on.
What the authority says can happen if this is not fixed: “If the axle tubes rotate, the vehicle's driveshaft may bind resulting in a loss of power and an increased risk of a crash.”
affected
in the notice
caught
| Campaign | 18E070 |
|---|---|
| Filed by | TAP Worldwide, LLC |
| System at fault | Power Train:Axle Assembly |
| Reported to NHTSA | 30 July 2018 |
| Model years | 9999-9999 |
| Vehicles named | G2 AXLE & GEAR AXLE HOUSING |
What the notice says today
The consequence
If the axle tubes rotate, the vehicle's driveshaft may bind resulting in a loss of power and an increased risk of a crash.
The remedy
TAP will notify owners and will replace the axle housings with new housings, free of charge. The recall began October 1, 2018. Owners may contact TAP customer service at 1-888-376-1417.
What it said before
This campaign is in the register but not yet in the dated wording archive, so we cannot yet say whether its text has moved. It enters the archive on the next pass.
This is one of 816 notices in the record whose component field names power train. Across that group the median wait before owners were written to was 42 days.
Last checked . No change has been recorded in the wording.
How to cite this record
Quoting the wording on this page means quoting a version, so the date belongs in the citation:
CarsMultiverse, recall 18E070, wording as read on 15 September 2026. https://carsmultiverse.com/recall/18e070/
The cross-border matches used on this site are deposited as a citable dataset: doi:10.5281/zenodo.22087136. The recall wording itself is published by the national authority named above and is theirs, not ours.
The recall record and its wording are published by the US National Highway Traffic Safety Administration and are US Government public domain. The dated archive, the comparison and any before-and-after above are CarsMultiverse. How fresh every engine behind this page is, is public on the status page. To check a specific vehicle, use NHTSA’s own VIN lookup.
Other Smittybilt notices we hold
- 20E047: Rubicon Express 4
- 19E060: Pro Comp Extended Thread (ET-Style) Lug Nuts, part numbers PXA16148 (chrome), PXA16148B (black) and PXA16148OET (short)
- 18V709: 2017-2018 Smittybilt SCOUT trailer kits, sold with tires and wheels included in the kit (SKU number 87400)
- 18E117: Poison Spyder Customs-brand Tire Carriers, part number 19-62-030TP1, sold as aftermarket parts
- 18E116: Poison Spyder Customs Tire Carrier Delete Plates, part number 19-04-012P1, sold as aftermarket parts
- 18E073: Pro Comp aftermarket Pro Runner Monotube Shock Absorbers, part numbers ZX2005 and ZX2007
- 18E072: Rubicon Express aftermarket Lower Control Arms, part numbers RE4000, RE4010, and RE4050
- 18E071: Pro Comp aftermarket Pitman Arms, part numbers 56713B-1, 56714B-1, 56716B-1, 56717B-1, 56715B-1, and DC600
All 14 Smittybilt campaigns we hold · Every manufacturer in the record
The fingerprint of this notice
We take a SHA-256 of each of the three blocks of text the authority publishes and keep the first eight characters. As we last read campaign 18E070 on 23 August 2026, they were:
- Defect summary
3f7743ab - Consequence
29638405 - Remedy
ae3e0648
We first read this notice on 21 August 2026. It has not moved since. If it ever does, these characters will not match, and the change will be dated here.
The wording we hold for 18E070 · how the whole register is watched
Put this notice on your site
A small badge that links here and names the register's reference. It costs one line of HTML and needs no key.
The badge is free to use. It links to this page and nowhere else, and it never shows advertising.
Owners of these cars
No register publishes what happens after the letter. Owners do: tell us, in two taps.
Anonymous: no account, no cookie, nothing you type is stored beyond these choices. Figures appear once 3 owners have answered, and are published with the record under CC BY 4.0.