Altec 470 Knuckle Boom Crane, Altec Effer 440, model years 2010 to 2011. Filed by Altec Industries Inc. and reported to NHTSA on 4 January 2018. 4 vehicles potentially affected.
What the notice says Altec Industries Inc. (Altec) is recalling certain 2010-2011 Effer 440 and 470 Knuckle Boom Cranes. The inner race rotation bearing fasteners for the crane turret may fail and the pedestal may crack if the fasteners are not replaced every two years.
Is your vehicle included? Check with your VIN at NHTSA, or ask a dealer. This page is an independent copy of the notice, kept so you can see what changed after it was published. It is not the authority, and the authority’s own text is the one to act on.
Altec's own number for this recall: CSN 674. That is the number on the owner letter and on the dealer paperwork. 18V006 is the number NHTSA gave the same campaign, and the number this page is filed under. They are one recall, written two ways.
What owners ask about this recall
- Which vehicles does recall 18V006 cover?
- Altec 470 Knuckle Boom Crane, Altec Effer 440, model years 2010-2011.
- What is wrong with them?
- Altec Industries Inc. (Altec) is recalling certain 2010-2011 Effer 440 and 470 Knuckle Boom Cranes. The inner race rotation bearing fasteners for the crane turret may fail and the pedestal may crack if the fasteners are not replaced every two years.
- What can happen if it is not put right?
- If the rotation bearing fasteners fail or the pedestal cracks, the crane may not be stable, increasing the risk of injury.
- Is there a fix yet?
- Yes, and it is free. Altec will notify owners, and dealers will inspect the pedestal weld for cracks and replace the inner race rotation bearing fasteners, free of charge. The recall began on February 2, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 674.
- What should I do now?
- Check your own vehicle by its VIN with NHTSA, which is the record to act on. Altec calls this recall CSN 674, which is the number on the owner letter and the dealer paperwork.
Answered from the register this site holds. NHTSA is the record to act on.
What the authority says can happen if this is not fixed: “If the rotation bearing fasteners fail or the pedestal cracks, the crane may not be stable, increasing the risk of injury.”
affected
in the notice
caught
| Campaign | 18V006 |
|---|---|
| Filed by | Altec Industries Inc. |
| System at fault | Equipment |
| Reported to NHTSA | 4 January 2018 |
| Model years | 2010-2011 |
| Vehicles named | ALTEC 470 KNUCKLE BOOM CRANE, ALTEC EFFER 440 |
What the notice says today
The consequence
If the rotation bearing fasteners fail or the pedestal cracks, the crane may not be stable, increasing the risk of injury.
The remedy
Altec will notify owners, and dealers will inspect the pedestal weld for cracks and replace the inner race rotation bearing fasteners, free of charge. The recall began on February 2, 2018. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 674.
What it said before
This campaign is in the register but not yet in the dated wording archive, so we cannot yet say whether its text has moved. It enters the archive on the next pass.
This is one of 2,632 notices in the record whose component field names equipment. Across that group the median wait before owners were written to was 29 days.
Last checked . No change has been recorded in the wording.
How to cite this record
Quoting the wording on this page means quoting a version, so the date belongs in the citation:
CarsMultiverse, recall 18V006, wording as read on 16 September 2026. https://carsmultiverse.com/recall/18v006/
The cross-border matches used on this site are deposited as a citable dataset: doi:10.5281/zenodo.22087136. The recall wording itself is published by the national authority named above and is theirs, not ours.
The recall record and its wording are published by the US National Highway Traffic Safety Administration and are US Government public domain. The dated archive, the comparison and any before-and-after above are CarsMultiverse. How fresh every engine behind this page is, is public on the status page. To check a specific vehicle, use NHTSA’s own VIN lookup.
Other Altec notices we hold
- 26V463: 2024-2026 AT Series
- 26V457: 2013-2025 AP45A trucks
- 26V429: 2022-2026 Service Body
- 26V409: 2023-2025 Digger Derrick
- 26V384: 2024-2026 AC Series Crane
- 26V243: 2025-2026 AM Series Aerial Device
- 26V170: 2025 AC Series Crane and DT Series Digger Derrick
- 26V150: 2023-2026 Service Body, Aerial Device, Pressure Digger, Spray Truck, and Digger Derrick
All 183 Altec campaigns we hold · Every manufacturer in the record
The fingerprint of this notice
We take a SHA-256 of each of the three blocks of text the authority publishes and keep the first eight characters. As we last read campaign 18V006 on 23 August 2026, they were:
- Defect summary
1e53a5ab - Consequence
91d1c4e8 - Remedy
dca52c55
We first read this notice on 21 August 2026. It has not moved since. If it ever does, these characters will not match, and the change will be dated here.
The wording we hold for 18V006 · how the whole register is watched
This notice names one vehicle among several registers that have written about it. Every notice this site holds for the Altec Crane, in all seven, is kept on that vehicle's own page, with the newest in each.
Put this notice on your site
A small badge that links here and names the register's reference. It costs one line of HTML and needs no key.
The badge is free to use. It links to this page and nowhere else, and it never shows advertising.
Owners of these cars
No register publishes what happens after the letter. Owners do: tell us, in two taps.
Anonymous: no account, no cookie, nothing you type is stored beyond these choices. Figures appear once 3 owners have answered, and are published with the record under CC BY 4.0.