Terex Hi-Ranger, model year 2013. Filed by Terex South Dakota, Inc. and reported to NHTSA on 3 February 2015. 305 vehicles potentially affected.
What the notice says Terex South Dakota, Inc. (Terex) is recalling certain model year 2013 Hi-Ranger HR, HRX, TC, TCX, OM, and TLM trucks manufactured July 12, 2013, to December 26, 2013. On the affected vehicles, due to a problem with the bearing installation, the platform rotate cylinder can separate from the brackets and allow the …
Is your vehicle included? Check with your VIN at NHTSA, or ask a dealer. This page is an independent copy of the notice, kept so you can see what changed after it was published. It is not the authority, and the authority’s own text is the one to act on.
Terex's own number for this recall: SN614. That is the number on the owner letter and on the dealer paperwork. 15V058 is the number NHTSA gave the same campaign, and the number this page is filed under. They are one recall, written two ways.
What owners ask about this recall
- Which vehicles does recall 15V058 cover?
- Terex Hi-Ranger, model year 2013.
- What is wrong with them?
- Terex South Dakota, Inc. (Terex) is recalling certain model year 2013 Hi-Ranger HR, HRX, TC, TCX, OM, and TLM trucks manufactured July 12, 2013, to December 26, 2013.
- What can happen if it is not put right?
- If the platform rotates without operator control, there is an increased risk of injury.
- Is there a fix yet?
- Yes, and it is free. Terex will notify owners, and dealers will replace the cylinder, free of charge. The recall began Feburary 17, 2015. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN614.
- What should I do now?
- Check your own vehicle by its VIN with NHTSA, which is the record to act on. Terex calls this recall SN614, which is the number on the owner letter and the dealer paperwork.
Answered from the register this site holds. NHTSA is the record to act on.
What the authority says can happen if this is not fixed: “If the platform rotates without operator control, there is an increased risk of injury.”
affected
in the notice
caught
| Campaign | 15V058 |
|---|---|
| Filed by | Terex South Dakota, Inc. |
| System at fault | Equipment |
| Reported to NHTSA | 3 February 2015 |
| Model years | 2013-2013 |
| Vehicles named | TEREX HI-RANGER |
What the notice says today
The consequence
If the platform rotates without operator control, there is an increased risk of injury.
The remedy
Terex will notify owners, and dealers will replace the cylinder, free of charge. The recall began Feburary 17, 2015. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN614.
What it said before
This campaign is in the register but not yet in the dated wording archive, so we cannot yet say whether its text has moved. It enters the archive on the next pass.
This is one of 2,632 notices in the record whose component field names equipment. Across that group the median wait before owners were written to was 29 days.
Last checked . No change has been recorded in the wording.
How to cite this record
Quoting the wording on this page means quoting a version, so the date belongs in the citation:
CarsMultiverse, recall 15V058, wording as read on 16 September 2026. https://carsmultiverse.com/recall/15v058/
The cross-border matches used on this site are deposited as a citable dataset: doi:10.5281/zenodo.22087136. The recall wording itself is published by the national authority named above and is theirs, not ours.
The recall record and its wording are published by the US National Highway Traffic Safety Administration and are US Government public domain. The dated archive, the comparison and any before-and-after above are CarsMultiverse. How fresh every engine behind this page is, is public on the status page. To check a specific vehicle, use NHTSA’s own VIN lookup.
Other Terex notices we hold
- 26V167: 2019-2026 General 65, General 80, General 95, C4000, C5000, and C6000 digger utility trucks equipped with pole guides
- 26V006: 2025 TL-Series, LT-Series, LTM40, HR40, HR46, and SCM55 areal device
- 26E016: pole position guide arm assembly pins with part number 450543
- 25V084: 2024 Commander
- 24V740: 2023-2024 TL80, TL80/112, TL100, and TM
- 24V526: 2020-2024 XT Pro
- 24V438: 2022-2023 TM
- 24V252: 2023 Commander
All 61 Terex campaigns we hold · Every manufacturer in the record
The fingerprint of this notice
We take a SHA-256 of each of the three blocks of text the authority publishes and keep the first eight characters. As we last read campaign 15V058 on 23 August 2026, they were:
- Defect summary
e435bf70 - Consequence
e80256ec - Remedy
a4a77c36
We first read this notice on 21 August 2026. It has not moved since. If it ever does, these characters will not match, and the change will be dated here.
The wording we hold for 15V058 · how the whole register is watched
Put this notice on your site
A small badge that links here and names the register's reference. It costs one line of HTML and needs no key.
The badge is free to use. It links to this page and nowhere else, and it never shows advertising.
Owners of these cars
No register publishes what happens after the letter. Owners do: tell us, in two taps.
Anonymous: no account, no cookie, nothing you type is stored beyond these choices. Figures appear once 3 owners have answered, and are published with the record under CC BY 4.0.