Terex Tlm, model years 2016 to 2017. Filed by Terex South Dakota, Inc. and reported to NHTSA on 17 September 2019. 42 vehicles potentially affected.
What the notice says Terex South Dakota, Inc. (Terex) is recalling certain TLM aerial-device vehicles equipped with external holding valve blocks. The incorrect holding valve was installed on the upper boom cylinder base end. As a result, if the hose for the upper boom raise function should burst while at maximum load and maximum side …
Is your vehicle included? Check with your VIN at NHTSA, or ask a dealer. This page is an independent copy of the notice, kept so you can see what changed after it was published. It is not the authority, and the authority’s own text is the one to act on.
Terex's own number for this recall: SN675. That is the number on the owner letter and on the dealer paperwork. 19V659 is the number NHTSA gave the same campaign, and the number this page is filed under. They are one recall, written two ways.
What owners ask about this recall
- Which vehicles does recall 19V659 cover?
- Terex TLM, model years 2016-2017.
- What is wrong with them?
- Terex South Dakota, Inc. (Terex) is recalling certain TLM aerial-device vehicles equipped with external holding valve blocks. The incorrect holding valve was installed on the upper boom cylinder base end.
- What can happen if it is not put right?
- Uncontrolled movement of the boom can increase the risk of an injury.
- Is there a fix yet?
- Yes, and it is free. Terex will notify owners, and dealers will replace the base end holding valve on the upper boom lift cylinder, free of charge. The recall began October 25, 2019. Owners may contact Terex customer service at 1-844-837-3948. Terex's number for this recall is SN675.
- What should I do now?
- Check your own vehicle by its VIN with NHTSA, which is the record to act on. Terex calls this recall SN675, which is the number on the owner letter and the dealer paperwork.
Answered from the register this site holds. NHTSA is the record to act on.
What the authority says can happen if this is not fixed: “Uncontrolled movement of the boom can increase the risk of an injury.”
affected
in the notice
caught
| Campaign | 19V659 |
|---|---|
| Filed by | Terex South Dakota, Inc. |
| System at fault | Equipment |
| Reported to NHTSA | 17 September 2019 |
| Model years | 2016-2017 |
| Vehicles named | TEREX TLM |
What the notice says today
The consequence
Uncontrolled movement of the boom can increase the risk of an injury.
The remedy
Terex will notify owners, and dealers will replace the base end holding valve on the upper boom lift cylinder, free of charge. The recall began October 25, 2019. Owners may contact Terex customer service at 1-844-837-3948. Terex's number for this recall is SN675.
What it said before
This campaign is in the register but not yet in the dated wording archive, so we cannot yet say whether its text has moved. It enters the archive on the next pass.
This is one of 2,632 notices in the record whose component field names equipment. Across that group the median wait before owners were written to was 29 days.
Last checked . No change has been recorded in the wording.
How to cite this record
Quoting the wording on this page means quoting a version, so the date belongs in the citation:
CarsMultiverse, recall 19V659, wording as read on 16 September 2026. https://carsmultiverse.com/recall/19v659/
The cross-border matches used on this site are deposited as a citable dataset: doi:10.5281/zenodo.22087136. The recall wording itself is published by the national authority named above and is theirs, not ours.
The recall record and its wording are published by the US National Highway Traffic Safety Administration and are US Government public domain. The dated archive, the comparison and any before-and-after above are CarsMultiverse. How fresh every engine behind this page is, is public on the status page. To check a specific vehicle, use NHTSA’s own VIN lookup.
Other Terex notices we hold
- 26V167: 2019-2026 General 65, General 80, General 95, C4000, C5000, and C6000 digger utility trucks equipped with pole guides
- 26V006: 2025 TL-Series, LT-Series, LTM40, HR40, HR46, and SCM55 areal device
- 26E016: pole position guide arm assembly pins with part number 450543
- 25V084: 2024 Commander
- 24V740: 2023-2024 TL80, TL80/112, TL100, and TM
- 24V526: 2020-2024 XT Pro
- 24V438: 2022-2023 TM
- 24V252: 2023 Commander
All 61 Terex campaigns we hold · Every manufacturer in the record
The fingerprint of this notice
We take a SHA-256 of each of the three blocks of text the authority publishes and keep the first eight characters. As we last read campaign 19V659 on 23 August 2026, they were:
- Defect summary
e4a9b3e6 - Consequence
0b33140a - Remedy
cfd94220
We first read this notice on 21 August 2026. It has not moved since. If it ever does, these characters will not match, and the change will be dated here.
The wording we hold for 19V659 · how the whole register is watched
Put this notice on your site
A small badge that links here and names the register's reference. It costs one line of HTML and needs no key.
The badge is free to use. It links to this page and nowhere else, and it never shows advertising.
Owners of these cars
No register publishes what happens after the letter. Owners do: tell us, in two taps.
Anonymous: no account, no cookie, nothing you type is stored beyond these choices. Figures appear once 3 owners have answered, and are published with the record under CC BY 4.0.