Imt Dominator, model years 2013 to 2016. Filed by Iowa Mold Tooling Co., Inc. and reported to NHTSA on 16 February 2016. 822 vehicles potentially affected.
What the notice says Iowa Mold Tooling Co., Inc. (IMT) is recalling certain model year 2013-2016 Dominator-Propane, Dominator I, Dominator II, Dominator III, and Dominator IV vehicles manufactured April 4, 2013, to January 22, 2016. The affected vehicles are fitted with IMT Series III cranes, models 6000, 7500, 8600, 9500, 10000, 12000, …
Is your vehicle included? Check with your VIN at NHTSA, or ask a dealer. This page is an independent copy of the notice, kept so you can see what changed after it was published. It is not the authority, and the authority’s own text is the one to act on.
Imt's own number for this recall: TB2016002. That is the number on the owner letter and on the dealer paperwork. 16V088 is the number NHTSA gave the same campaign, and the number this page is filed under. They are one recall, written two ways.
What owners ask about this recall
- Which vehicles does recall 16V088 cover?
- Imt Dominator, model years 2013-2016.
- What is wrong with them?
- Iowa Mold Tooling Co., Inc. (IMT) is recalling certain model year 2013-2016 Dominator-Propane, Dominator I, Dominator II, Dominator III, and Dominator IV vehicles manufactured April 4, 2013, to January 22, 2016.
- What can happen if it is not put right?
- If the valve bank cover detaches from the crane it could be a road hazard, increasing the risk of a crash.
- Is there a fix yet?
- Yes, and it is free. IMT will notify owners, and dealers will replace the valve bank cover with a thicker one, free of charge. The recall began on April 6, 2016. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2016002.
- What should I do now?
- Check your own vehicle by its VIN with NHTSA, which is the record to act on. Imt calls this recall TB2016002, which is the number on the owner letter and the dealer paperwork.
Answered from the register this site holds. NHTSA is the record to act on.
What the authority says can happen if this is not fixed: “If the valve bank cover detaches from the crane it could be a road hazard, increasing the risk of a crash.”
affected
in the notice
caught
| Campaign | 16V088 |
|---|---|
| Filed by | Iowa Mold Tooling Co., Inc. |
| System at fault | Equipment |
| Reported to NHTSA | 16 February 2016 |
| Model years | 2013-2016 |
| Vehicles named | IMT DOMINATOR |
What the notice says today
The consequence
If the valve bank cover detaches from the crane it could be a road hazard, increasing the risk of a crash.
The remedy
IMT will notify owners, and dealers will replace the valve bank cover with a thicker one, free of charge. The recall began on April 6, 2016. Owners may contact IMT customer service at 1-800-247-5958. IMT's number for this recall is TB2016002.
What it said before
This campaign is in the register but not yet in the dated wording archive, so we cannot yet say whether its text has moved. It enters the archive on the next pass.
This is one of 2,632 notices in the record whose component field names equipment. Across that group the median wait before owners were written to was 29 days.
Last checked . No change has been recorded in the wording.
How to cite this record
Quoting the wording on this page means quoting a version, so the date belongs in the citation:
CarsMultiverse, recall 16V088, wording as read on 16 September 2026. https://carsmultiverse.com/recall/16v088/
The cross-border matches used on this site are deposited as a citable dataset: doi:10.5281/zenodo.22087136. The recall wording itself is published by the national authority named above and is theirs, not ours.
The recall record and its wording are published by the US National Highway Traffic Safety Administration and are US Government public domain. The dated archive, the comparison and any before-and-after above are CarsMultiverse. How fresh every engine behind this page is, is public on the status page. To check a specific vehicle, use NHTSA’s own VIN lookup.
Other Imt notices we hold
- 23E042: IMT Hydraulic Loaders model, 50-345, part number, 6390121
- 22E067: Hydraulic Loaders, model 42684 and part number 6390121
- 18E105: Omnex Proportional Wireless Transmitters, part numbers 70733882 and 70733883, used for controlling cranes
- 17V515: 2016-2017 Dominator Contractor series trucks built on 2017 Ford Super Duty chassis
- 17V208: one model year 2013 Refuse-Container Delivery vehicle, equipped with a compressed natural gas (CNG) fuel system by Agility Fuel Systems
- 17E067: Dominator I Crane bodies sold for installation onto other chassis
- 16E012: Series III Cranes, models 6000, 7500, 8600, 9500, 10000, 12000, and 14000, manufactured April 4, 2013, to January 22, 2016
All 8 Imt campaigns we hold · Every manufacturer in the record
The fingerprint of this notice
We take a SHA-256 of each of the three blocks of text the authority publishes and keep the first eight characters. As we last read campaign 16V088 on 23 August 2026, they were:
- Defect summary
096e7a5b - Consequence
8ecc07ba - Remedy
53699a00
We first read this notice on 21 August 2026. It has not moved since. If it ever does, these characters will not match, and the change will be dated here.
The wording we hold for 16V088 · how the whole register is watched
Put this notice on your site
A small badge that links here and names the register's reference. It costs one line of HTML and needs no key.
The badge is free to use. It links to this page and nowhere else, and it never shows advertising.
Owners of these cars
No register publishes what happens after the letter. Owners do: tell us, in two taps.
Anonymous: no account, no cookie, nothing you type is stored beyond these choices. Figures appear once 3 owners have answered, and are published with the record under CC BY 4.0.